You can connect your tini® to the mains or choose to make it fully or partially self-sufficient.
In case it is self-sufficient, it is important to make a detailed study adjusted to the demand, use and location of the module(s), once the project is defined. Each of the elements and costs described below are dimensioned for a tini® M module disconnected from the grid and for weekend use.
The water tank is accompanied by a pressure group. In general, both are located in the installation room of the tini®, unless, due to demand, the size of the tank makes it necessary to place it outside.
The water tank included in the customizer has a capacity of 1,000L and is sized for a weekend use of 2 persons:
- Shower 100L/5min
- Cistern 5/10L
- Washing hands/teeth 1.5L
- Drinking 1.5L/person/day
- Cooking 6L/day
If the demand is higher due to the number of occupants, our team will be in charge of resizing the tank and budgeting its installation, since it will be buried in the ground, the work will depend on the type and consistency of the ground.
The septic tank is a tank buried a few meters away from the tini® that is connected to it through the accessible floor of the installation room. The septic tank we install has a series of filters and bacteria that remove the detritus, thus draining clean water to the ground.
It will be sufficient to empty it once every 3-5 years, but again it will depend on the use and number of occupants.
The price included in the customizer is a guide price that varies depending on the location and the type and consistency of the soil.
There are 3 options for supplying electricity to the tinis® by means of solar panels. For each of them a detailed study based on location and demand will be required:
Self-sufficient for weekend use
You will need solar panels and batteries. The price indicated in the customizer derives from the calculation made for a single module for weekend use with the following equipment:
- Compact refrigerator
- Extractor hood
- Microwave oven
- Thermos with accumulator (80L)
- LED lighting
Self-sufficient for daily use
You will need solar panels and batteries, plus a guardian-sol 6000w generator.
Self-consumption
With solar panels, but in this case without batteries, and grid connection.
*The price included in the customizer is for 9 solar panels and 2 batteries.
You can customize the interior space of the tini® by choosing the equipment you need.
You can choose it diaphanous, with bathroom and kitchen, with only one of the two or fully equipped and furnished, as best suits your needs!
It is designed to consume the least amount of space and includes all equipment. The washbasin is integrated in a laminated pine countertop (moisture resistant and treated with waterproof beeswax) with integrated towel rack. The toilet is suspended with recessed cistern, resin shower tray and all the faucets are of the Spanish brand Imex. It also includes a backlit mirror.
The price of the kitchen indicated in the customizer includes the cabinet fronts finished in birch. If you want a different finish, please consult with our sales team. The countertop and backsplash are made of high-strength compact quartz (in white). The sink and faucet are stainless steel.
If you need specific equipment, do not hesitate to tell the team, and we will make you the proposal that best suits your needs.
The kitchen, depending on the model, includes the following equipment:
- tini XS: worktop (1.30m long x 65cm deep) and compact quartz top, stainless steel sink and faucet, 2-burner vitro hob, extractor hood (including outside flue), compact under-counter refrigerator with freezer (108/18liters) and upper (1.30m long x 45cm deep) and lower (1.30m long x 65cm deep) cabinets.
- tini S: worktop (1.93m long x 65cm deep) and compact quartz top, stainless steel sink and faucet, 2-burner vitro hob, extractor hood (including outside flue), compact under-counter refrigerator with freezer (108/18liters) and upper (1.93m long x 45cm deep) and lower (1.93m long x 65cm deep) cabinets.
- tini M: worktop (1.93m long x 65cm deep) and compact quartz top, stainless steel sink and faucet, 2-burner vitro hob, extractor hood (including outside flue), compact under-counter refrigerator with freezer (108/18liters) and upper (1.93m long x 45cm deep) and lower (1.93m long x 65cm deep) cabinets.
- tini L: worktop (1.93m long x 65cm deep) and compact quartz top, stainless steel sink and faucet, 2-burner vitro hob, extractor hood (including outside flue), compact under-counter refrigerator with freezer (108/18liters) and upper (1.93m long x 45cm deep) and lower (1.93m long x 65cm deep) cabinets.
- tini 2M: worktop (2.76m long x 65cm deep) and top in compact quartz, stainless steel sink and faucet, 4 ring vitro hob, extractor hood (including outside flue), panel fridge and freezer (210/79liters), upper (2.76m long x 45cm deep) and lower (2.76m long x 65cm deep) cabinets.
It also includes an island with lower storage and dimensions of 2.12m long x 65cm deep.
- tini 3M: worktop (2.27m long x 65cm deep) and top in compact quartz, stainless steel sink and faucet, 4-burner hob, extractor hood (including outside flue), refrigerator and freezer (210/79liters), upper (2.76m long x 45cm deep) and lower (2.76m long x 65cm deep) cabinets.
It also includes an island with lower storage and dimensions of 2.82m long x 65cm deep.
All our furniture is made of Galician pine treated with matte varnish. The base size of the bed base is 1.50m wide x 2m long, but we have no problem in adapting to other dimensions. The price indicated in the customizer includes drawers under the bed base. If you would like, we can also include bedside tables on both sides of the bed base, with an extra cost of 550€/sleeper.
The price of the cabinets indicated in the customizer is with birch plywood finish. If you want a different finish, please contact our sales team. Our cabinets go from floor to ceiling and are delivered dressed, with hanging bar and shelves, as well as with interior led lighting.
The bench, like the bed base, is made of Galician pine wood treated with matte varnish. It will help you to optimize the space of the living area, as it is integrated into the perimeter and comes equipped with drawers for storage (cushions are not included in the price).
A light dining table, in continuity with the bench, made of Galician pine wood. In the case of the tini® S model, it is a folding table to avoid consuming a lot of space.
With our wood stove you can easily heat up to a tini® M. If your space is larger, our team will advise you on the different possibilities. The price of the stove includes:
- stove with woodshed and its installation
- vitifricated and insulated inner draft
- external shot with cap
- interior floor protection plate
Another option to air condition the tinis® is to install a hot/cold air pump. There are other alternatives to this type of air conditioning of which our team can inform you without obligation. Includes: Outdoor unit, indoor split with 3 outlets, installation and legalization report.
The marked and rough textures of the exterior materials contrast with the interior of the tinis®, where warm materials predominate. We use all-natural woods that create the cozy atmosphere so characteristic of tinis®.
Plasterboard is a simple and light material, a smooth surface that provides a clean and homogeneous environment.
In wet rooms the plasterboard we use is water-repellent, to protect the walls and ceiling from humidity.
Our interior material with more character, poplar OSB wood, is made only with tree branches, avoiding the felling of specimens. It is a dense wood with great insulating capacity, both thermally and acoustically.
Birch is a wood with a soft and discreet grain, which makes the space very bright. Like OSB, it adds an extra layer of insulation to tinis® facades.
The materials chosen for the exterior of our tinis® have little or no ecological footprint, they are zero kilometer materials, acquired locally and with good performance over the years.
Their durability is guaranteed, and their maintenance is null. Both galvanized and corten steel, as well as burned wood, require no maintenance.
Galvanized steel is a very resistant and durable material. We use it in the form of corrugated sheets, which gives the facade rhythm and variation. It also reflects the surroundings and the evening light.
The Corten steel facade turns the tini® into a sculpture. Its marked texture in orange and ochre tones stands out among the vegetation and changes over time. Like galvanized steel, it ages well and has great durability.
The wood we use for the facade is subjected to a previous treatment, with the Japanese technique Shou Sugi Ban. This technique burns the first layers of the wood, giving it greater resistance to the passage of time and highlighting its natural grain. We love tinis® with a wood finish because it also adds an extra layer of insulation to the facade.
The wood in its natural color is protected with a heat treatment, giving rise to what is known as heat-treated wood. Its caramel color blends perfectly with the structure of the tinis®.
At tini® we have our own system, based on our model M (32m2). With optimized dimensions for transport, the combination of modules of the same or different sizes allows for a wide variety of configurations, based on the use and experience of the user.
The tini® XS model is the smallest model in our catalog. It has a surface area of 15.7m2, with a small toilet and the possibility of kitchen furniture.
You can choose it diaphanous (base price) or with the equipment that best suits your needs.
The tini® S model has a surface area of 23.5m2, with maximum use of the interior space, which is enhanced by its large corner windows.
The interior consists of a sleeping area, small kitchen-living room and bathroom.
You can choose it diaphanous (base price) or with the equipment that best suits your needs.
The tini® M model has a surface area of 34m2, and is the base module of our system. It has optimized dimensions for transport.
The space opens to the outside thanks to two large windows, and the private uses are located in the opaque facades. This creates a clean and open space that changes the perception of size.
You can choose it diaphanous (base price) or with the equipment that best suits your needs.
The tini® L model has a surface area of 45m2. The configuration of the space is achieved by joining a module M (34m2) with a second module (11m2), placed in a T-shape.
The small module becomes an independent bedroom, while the larger module concentrates the day area, living-dining-kitchen, bathroom and a second bedroom.
You can choose it diaphanous (base price) or with the equipment that best suits your needs.
The tini® 2M model has a surface area of 68m2. The configuration of the space is achieved by joining 2 modules M (34m2) on the long side.
In this way, the facade surface is reduced, creating a large living-dining-kitchen area, two independent bedrooms and a bathroom.
You can choose it diaphanous (base price) or with the equipment that best suits your needs.
The tini® 3M model has a surface area of 102m2. The configuration of the space is achieved by joining 3 modules M (34m2) on its long side.
This optimizes material and cost by reducing the facade surfaces.
You can choose it diaphanous (base price) or with the equipment that best suits your needs.